Body
Environment: Computer on campus domain running minimum of Windows 10
Purpose: Steps on how to connect to campus printers
Students: Changes coming May 2021 in print charges to use Deb-x funds.
 |
Connecting to the new Student Fleet of Printers on Windows Devices
This guide will walk through the steps for a computer to print to the Student Fleet of Printers located on campus. Devices in the student fleet are labeled with a green "Hello my name is" tag. Students, Faculty, Staff and operational accounts can use this guide.
To use campus printing you will must be connected to the WebFX wireless network or using an Ethernet connection on campus.
|
Opening the Print Queue
- Click on the Start button and type \\xprinters
- Press Enter.
- When prompted webfx\<your username> example webfx\itservices
- Password: your stfx password
- Check off remember my credentials
- A window with the xprinters print queue will appear.
Installing the Driver
| Secured queue-printing: |
Unsecured direct-printing: |
| Secured Printing sends your job to a virtual queue. To release your job you walk up to one of the 20 Student Printers on campus, authenticate and select the job you wish to print. |
When you choose unsecured printing your job will immediately be sent to the printer. |
- Right click on the printer called Print-Stu
- Select Connect
- You will be prompted to install a driver for your desired printer.
- Click Install driver.
- Once the driver is installed, the window will close. You are now setup to print to the queue.
|
- Right click on any other printer in the list, and click Connect.
- The same process will occur as above, but the selected printer will be set up for direct printing.
- You can right click and connect to as many printers in this list as you want.
|
Printing to the xprinters
When printing to the Konica printers, the process is the same as any personal printer:
- Click File
- Click Print
- Select the xprinters-Stu for secured printing or the name of the printer you want to direct-print to.
Checking Printer Properties
Double Sided vs Single Sided
- Click on Printer Properties
- In this window, verify that the print settings are correct. These settings are defaulted to double sided black and white.
- Change the Drop down to Layout/Finish .
- Verify Print Type is set to 2-Sided (or desired setting)
* Note: The descriptions for color preferences are as follows:
- In the printer properties, Change the drop down to Quality
-
- Auto Color: Charges account accordingly to color pages printed and black and white for pages with no color.
- 2 Color: Every page is charged the Color rate regardless if only black and white document. ( We DO NOT recommend this setting )
- Gray Scale: Prints black and white regardless if color is present. This is the recommended setting.
- Click OK
- Click Print
You can now log into any of the units around campus and print your print job.
Set up your StFX ID
Your stfx ID card can be used on campus printers to avoid logging into the device for secured printing
- Swipe your card on using the swipe on the right hand try
- Log in using your stfx username and password