Using Preview in Quick Copy with Zoom

Select the Paper Size you wish to print on

  1. Under Paper, select your preferred paper size for your reduced or enlarged image.Uploaded image

Zoom Settings

  1. Select Zoom.
  2. Select the black box (with 100% in it) and enter the percentage (ie. what you think might work)!
  3. Press Close and OK.

Set up the Original on the device

Place your original on the glass or in the document feeder.

  • If you have a specific area of a page that you wanted to enlarge (like a photo or article from a magazine or textbook, position that image to line up with the arrow on the glass at the top left-hand corner as this is the starting point for enlarging or reducing.

Using Preview feature

  1. Select the “Preview” icon from the Registered Keys list on the right side of the screen.A Preview screen will appear.

Uploaded image

 

  1. On the Preview screen select the Original Direction image that matches the orientation of your original.*Note: Image shown here reflects a document placed on the document glass.(*If your original was placed in the document feeder, images will be shown face-up.)
  2. Select Start on the Preview screen (*not the blue Start icon – as this will print the image).An image will be generated on the screen that reflects exactly what your image would look like on the paper that you asked for.

Uploaded image

  1. If you do NOT like the image(s), select the red Stop icon and it will take you back to the Copy screen.

(*Note: If you press the Cancel icon you will lose the paper tray you chose and the percentage).

Go back into Zoom and select C to clear then change the percentage and select Preview again.

Printing your enlargement

  1. Once you are satisfied with the image, select either the Print or the blue Start icon to output your copy.